# Drill Mills

Drill/End Mills

0.0312" (1/32) Cutter DIA x 0.0930" (3/32) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.0312" (1/32) Cutter DIA x 0.0930" (3/32) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.0469" (3/64) Cutter DIA x 0.1410" Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.0469" (3/64) Cutter DIA x 0.1410" Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.0625" (1/16) Cutter DIA x 0.1870" (3/16) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.0625" (1/16) Cutter DIA x 0.1870" (3/16) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.0781" (5/64) Cutter DIA x 0.2500" (1/4) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.0781" (5/64) Cutter DIA x 0.2500" (1/4) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.0937" (3/32) Cutter DIA x 0.3750" (3/8) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.0937" (3/32) Cutter DIA x 0.3750" (3/8) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.1250" (1/8) Cutter DIA x 0.5000" (1/2) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.1250" (1/8) Cutter DIA x 0.5000" (1/2) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.1406" (9/64) Cutter DIA x 0.5620" (9/16) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.1406" (9/64) Cutter DIA x 0.5620" (9/16) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.1562" (5/32) Cutter DIA x 0.5620" (9/16) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.1562" (5/32) Cutter DIA x 0.5620" (9/16) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.1875" (3/16) Cutter DIA x 0.6250" (5/8) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.1875" (3/16) Cutter DIA x 0.6250" (5/8) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.2187" (7/32) Cutter DIA x 0.7500" (3/4) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.2187" (7/32) Cutter DIA x 0.7500" (3/4) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.2500" (1/4) Cutter DIA x 0.7500" (3/4) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.2500" (1/4) Cutter DIA x 0.7500" (3/4) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.0394" Cutter DIA x 0.1250" (1/8) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.0394" Cutter DIA x 0.1250" (1/8) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.3125" (5/16) Cutter DIA x 0.8120" (13/16) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.3125" (5/16) Cutter DIA x 0.8120" (13/16) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.3750" (3/8) Cutter DIA x 0.8750" (7/8) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.3750" (3/8) Cutter DIA x 0.8750" (7/8) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.4375" (7/16) Cutter DIA x 1.0000" (1) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.4375" (7/16) Cutter DIA x 1.0000" (1) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.5000" (1/2) Cutter DIA x 1.0000" (1) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.5000" (1/2) Cutter DIA x 1.0000" (1) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.1181" Cutter DIA x 0.3750" (3/8) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.1181" Cutter DIA x 0.3750" (3/8) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.6250" (5/8) Cutter DIA x 1.2500" (1-1/4) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.6250" (5/8) Cutter DIA x 1.2500" (1-1/4) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.7500" (3/4) Cutter DIA x 1.5000" (1-1/2) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.7500" (3/4) Cutter DIA x 1.5000" (1-1/2) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

1.0000" (1) Cutter DIA x 2.0000" (2) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

1.0000" (1) Cutter DIA x 2.0000" (2) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated

Drill/End Mills

0.1250" (1/8) Cutter DIA x 0.3750" (3/8) Length of Cut x 90? included Cobalt Drill/End Mill, 4 Flutes

Drill/End Mills

0.1250" (1/8) Cutter DIA x 0.3750" (3/8) Length of Cut x 90? included Cobalt Drill/End Mill, 2 Flutes

Drill/End Mills

0.1875" (3/16) Cutter DIA x 0.5000" (1/2) Length of Cut x 90? included Cobalt Drill/End Mill, 4 Flutes

Drill/End Mills

0.2500" (1/4) Cutter DIA x 0.6250" (5/8) Length of Cut x 90? included Cobalt Drill/End Mill, 4 Flutes

Drill/End Mills

0.2500" (1/4) Cutter DIA x 0.6250" (5/8) Length of Cut x 90? included Cobalt Drill/End Mill, 2 Flutes

Drill/End Mills

0.3125" (5/16) Cutter DIA x 0.7500" (3/4) Length of Cut x 90? included Cobalt Drill/End Mill, 4 Flutes

Drill/End Mills

0.3750" (3/8) Cutter DIA x 0.7500" (3/4) Length of Cut x 90? included Cobalt Drill/End Mill, 4 Flutes

Drill/End Mills

0.3750" (3/8) Cutter DIA x 0.7500" (3/4) Length of Cut x 90? included Cobalt Drill/End Mill, 2 Flutes

Drill/End Mills

0.4375" (7/16) Cutter DIA x 1.0000" (1) Length of Cut x 90? included Cobalt Drill/End Mill, 4 Flutes

Drill/End Mills

0.5000" (1/2) Cutter DIA x 1.2500" (1-1/4) Length of Cut x 90? included Cobalt Drill/End Mill, 4 Flutes

Drill/End Mills

0.6250" (5/8) Cutter DIA x 1.6250" (1-5/8) Length of Cut x 90? included Cobalt Drill/End Mill, 4 Flutes

Drill/End Mills

0.7500" (3/4) Cutter DIA x 1.6250" (1-5/8) Length of Cut x 90? included Cobalt Drill/End Mill, 4 Flutes

Drill/End Mills

1.0000" (1) Cutter DIA x 2.0000" (2) Length of Cut x 90? included Cobalt Drill/End Mill, 4 Flutes

Drill/End Mills

1.0000" (1) Cutter DIA x 1.8750" (1-7/8) Length of Cut x 90? included Cobalt Drill/End Mill, 4 Flutes

Drill/End Mills

0.0156" (1/64) Cutter DIA x 0.0470" (3/64) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes

Drill/End Mills

0.0156" (1/64) Cutter DIA x 0.0470" (3/64) Length of Cut x 90? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.0156" (1/64) Cutter DIA x 0.0470" (3/64) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, AlTiN Coated

Drill/End Mills

0.0312" (1/32) Cutter DIA x 0.0930" (3/32) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes

Drill/End Mills

0.0312" (1/32) Cutter DIA x 0.0930" (3/32) Length of Cut x 90? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.0312" (1/32) Cutter DIA x 0.0930" (3/32) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, AlTiN Coated

Drill/End Mills

0.0469" (3/64) Cutter DIA x 0.1410" Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes

Drill/End Mills

0.0469" (3/64) Cutter DIA x 0.1410" Length of Cut x 90? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.0469" (3/64) Cutter DIA x 0.1410" Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, AlTiN Coated

Drill/End Mills

0.0625" (1/16) Cutter DIA x 0.1870" (3/16) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes

Drill/End Mills

0.0625" (1/16) Cutter DIA x 0.1870" (3/16) Length of Cut x 90? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.0625" (1/16) Cutter DIA x 0.1870" (3/16) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, TiN Coated

Drill/End Mills

0.0625" (1/16) Cutter DIA x 0.1870" (3/16) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, AlTiN Coated

Drill/End Mills

0.0781" (5/64) Cutter DIA x 0.2500" (1/4) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes

Drill/End Mills

0.0781" (5/64) Cutter DIA x 0.2500" (1/4) Length of Cut x 90? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.0781" (5/64) Cutter DIA x 0.2500" (1/4) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, TiN Coated

Drill/End Mills

0.0781" (5/64) Cutter DIA x 0.2500" (1/4) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, AlTiN Coated

Drill/End Mills

0.0937" (3/32) Cutter DIA x 0.3750" (3/8) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes

Drill/End Mills

0.0937" (3/32) Cutter DIA x 0.3750" (3/8) Length of Cut x 90? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.0937" (3/32) Cutter DIA x 0.3750" (3/8) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, TiN Coated

Drill/End Mills

0.0937" (3/32) Cutter DIA x 0.3750" (3/8) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, AlTiN Coated

Drill/End Mills

0.1094" (7/64) Cutter DIA x 0.3750" (3/8) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes

Drill/End Mills

0.1094" (7/64) Cutter DIA x 0.3750" (3/8) Length of Cut x 90? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.1094" (7/64) Cutter DIA x 0.3750" (3/8) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, AlTiN Coated

Drill/End Mills

0.1250" (1/8) Cutter DIA x 0.5000" (1/2) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes

Drill/End Mills

0.1250" (1/8) Cutter DIA x 0.5000" (1/2) Length of Cut x 90? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.1250" (1/8) Cutter DIA x 0.5000" (1/2) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, TiN Coated

Drill/End Mills

0.1250" (1/8) Cutter DIA x 0.5000" (1/2) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, AlTiN Coated

Drill/End Mills

0.1406" (9/64) Cutter DIA x 0.5620" (9/16) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes

Drill/End Mills

0.1406" (9/64) Cutter DIA x 0.5620" (9/16) Length of Cut x 90? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.1406" (9/64) Cutter DIA x 0.5620" (9/16) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, AlTiN Coated

Drill/End Mills

0.1562" (5/32) Cutter DIA x 0.5620" (9/16) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes

Drill/End Mills

0.1562" (5/32) Cutter DIA x 0.5620" (9/16) Length of Cut x 90? included Carbide Drill/End Mill, 2 Flutes

Drill/End Mills

0.1562" (5/32) Cutter DIA x 0.5620" (9/16) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, AlTiN Coated

Drill/End Mills

0.1718" Cutter DIA x 0.6250" (5/8) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes

Drill/End Mills

0.1718" Cutter DIA x 0.6250" (5/8) Length of Cut x 90? included Carbide Drill/End Mill, 4 Flutes, AlTiN Coated