End Mills (Corner Rounding)

879 item(s)

Show: 30 | 60 | 90 |
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0080" Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0080" Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0100" Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0100" Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0150" (1/64) Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0150" (1/64) Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0200" Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0200" Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0220" Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0220" Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0250" Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0250" Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0270" Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0270" Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0300" Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0300" Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0310" (1/32) Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0310" (1/32) Radius x 0.1875" (3/16) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0350" Radius x 0.2500" (1/4) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0350" Radius x 0.2500" (1/4) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0390" Radius x 0.2500" (1/4) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0390" Radius x 0.2500" (1/4) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0400" Radius x 0.2500" (1/4) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0400" Radius x 0.2500" (1/4) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0450" Radius x 0.2500" (1/4) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0450" Radius x 0.2500" (1/4) Head DIA x 0.5000" (1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0470" (3/64) Radius x 0.2500" (1/4) Head DIA x 0.6250" (5/8) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0470" (3/64) Radius x 0.2500" (1/4) Head DIA x 0.6250" (5/8) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0500" Radius x 0.2500" (1/4) Head DIA x 0.6250" (5/8) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0500" Radius x 0.2500" (1/4) Head DIA x 0.6250" (5/8) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0550" Radius x 0.2500" (1/4) Head DIA x 0.6250" (5/8) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0550" Radius x 0.2500" (1/4) Head DIA x 0.6250" (5/8) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0600" Radius x 0.3125" (5/16) Head DIA x 0.8750" (7/8) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0600" Radius x 0.3125" (5/16) Head DIA x 0.8750" (7/8) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0620" (1/16) Radius x 0.3125" (5/16) Head DIA x 0.8750" (7/8) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0620" (1/16) Radius x 0.3125" (5/16) Head DIA x 0.8750" (7/8) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0700" Radius x 0.3750" (3/8) Head DIA x 0.8750" (7/8) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0700" Radius x 0.3750" (3/8) Head DIA x 0.8750" (7/8) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0780" (5/64) Radius x 0.3750" (3/8) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0780" (5/64) Radius x 0.3750" (3/8) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0800" Radius x 0.3750" (3/8) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0800" Radius x 0.3750" (3/8) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0900" Radius x 0.3750" (3/8) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0900" Radius x 0.3750" (3/8) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0930" (3/32) Radius x 0.3750" (3/8) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0930" (3/32) Radius x 0.3750" (3/8) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 3 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.1000" Radius x 0.5000" (1/2) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 4 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.1000" Radius x 0.5000" (1/2) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 4 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.1250" (1/8) Radius x 0.5000" (1/2) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 4 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.1250" (1/8) Radius x 0.5000" (1/2) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 4 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.1560" (5/32) Radius x 0.6250" (5/8) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 4 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.1560" (5/32) Radius x 0.6250" (5/8) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 4 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.1870" (3/16) Radius x 0.6250" (5/8) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 4 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.1870" (3/16) Radius x 0.6250" (5/8) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 4 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.2500" (1/4) Radius x 1.0000" (1) Head DIA x 1.5000" (1-1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 4 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.2500" (1/4) Radius x 1.0000" (1) Head DIA x 1.5000" (1-1/2) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 4 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.1180" Radius x 0.5000" (1/2) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 4 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.1180" Radius x 0.5000" (1/2) Head DIA x 1.0000" (1) Neck Length Carbide 5? Flare Back Corner Rounding End Mill, 4 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0030" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0030" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0040" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0040" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0050" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0050" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0060" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0060" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0070" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0070" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0080" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0080" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0090" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0090" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0100" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0100" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0110" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0110" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0120" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0120" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0130" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0130" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0140" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0140" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0150" (1/64) Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0150" (1/64) Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0180" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0180" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0200" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0200" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0220" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes
Corner Rounding End Mills - End Mills (Corner Rounding)
Compare
Corner Rounding End Mills
0.0220" Radius x 0.0460" Pilot DIA Carbide 5? Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated